DWC Owners Forum


Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Tom S

Pages: [1] 2
General Discussion / post proccesser
« on: October 19, 2017, 04:11:26 AM »
how do you reinstall the Bt dwc rev2 mill post into bob-cad v 25? lost mine and can't remember how to get it back in there.

Vector Graphic Trading Post / DXF to share
« on: January 28, 2017, 10:48:05 AM »
just a couple dxf

General Discussion / dxf
« on: January 06, 2017, 06:26:42 AM »
my pc took a dump and I lost everything. is there a way to convert a nc. file back to a dxf? tom

General Discussion / just a note
« on: December 25, 2013, 09:10:26 AM »
Merry Christmas to all. hope you have a great day. tom

BobCAD Information / preview of enity
« on: December 11, 2013, 07:05:25 AM »
when I want to make an arc, letter or what ever, the preview lines of the enities are quite large. looked in the preferences of the settings default and not sure if that is the right way to go. any help would be greatfull. thanks tom.

General Discussion / new project
« on: December 08, 2013, 03:02:28 PM »
just a plaque I made. making sure this resizing will work.

General Discussion / who is this posting
« on: November 29, 2013, 06:43:39 AM »
just logged into this site and who ever is posting this stuff needs to be kicked off. just saying

General Discussion / dxf
« on: November 21, 2013, 09:40:50 AM »
trying to find this in dxf. any help would be great. even just the eagle

BobCAD Information / error message
« on: September 24, 2013, 09:27:12 AM »
trying to do a simple engrave but when I try to simulate I get a message saying, pole angle tolerance out of limits. never had this happen before. need some advice. thanks

General Discussion / V-Bits depths and widths
« on: March 21, 2013, 05:55:47 AM »
just came across this handy chart to show the widths and depths of various angled v cutters. hope it comes in handy for someone.

General DWC Questions / M03 not responding
« on: January 15, 2013, 07:03:21 AM »
just a quick ?.there seems to be times when i start up the machine, load a file that has ran before, hit start, all moves are good but the M03 is not reconized and spindle does not start. then i'll get out of mach 3, reboot it all, reload and all is fine. any suggestions on why this maybe happening? just driving me a little crazy. tom 

General Discussion / clip art
« on: December 24, 2012, 10:20:02 AM »
trying to get a tennessee titans logo into a dxf to v-carve. not having much luck. plus i need it to be in a 2 inch area.

BobCAD Information / tool path color
« on: July 22, 2012, 07:02:34 PM »
does anyone know how to change the color of the tool path? when you compute the tool path its yellow and hard to see. i'm using V-25. thanks

BobCAD Information / simulation
« on: July 20, 2012, 07:39:42 PM »
i must be missing something here. when do you simulate. before you post and save or after? it seems that after i post and save i get a message ( cant find xml file) and i cant get the simulation to work.

General DWC Questions / star
« on: July 04, 2012, 05:31:47 PM »
       on the live well signage that came with your files, where did you find the star that is put in the phrase. or did you make it yourself? the wife likes it and wants to use it on other signs. thanks, tom

Pages: [1] 2